Auto parts
-
Managed 24*1000Base T(X) + 4*1000 /10000Base SFP fiber optic port Ethernet Switch
24* 10/100/1000Base T(X) Ethernet ports and 4*1000Base-FX or 10GE SFP fiber optic ports.
Support Ethernet redundant Ring protocol( recovery time≤20ms)
Wire speed forwarding capability of all ports make sure of non-blocking message forwarding.
Support 802.1x authentication, VLAN, and broadcast storm suppression.
Support IEEE/802.3x full duplex flow control and Backpressure half duplex flow control.
Loop detection and Port+ IP+MAC binding.
Port traffic monitoring and fault event alarming
Support WEB visual interface, support SNMP management.
Automatic MDI/MDI-X crossover for plug-and-play
Overload protection and power reverse polarity protection.
Full-loaded operating temperature range -20 to 70℃.
19” 1U Rack Mount installation -
Unmanaged 8*1000Base T(X)+ 2*1000Base SFP FX Industrial Ethernet Switch
8*1000Base T(X) fast Ethernet ports & 2*1000Base SFP for both TX ethernet and FX fiber optic ports
IEEE802.3/802.3u//802.3x, store and forward
Wire speed forwarding capability of all ports make sure of non-blocking message forwarding.
Automatic MDI/MDI-X crossover for plug-and-play
Dual redundant power input, with overload protection and power reverse polarity protection.
Support full-loaded operating temperature range -40 to 85℃.
No fan, low power consumption design.
Din rail corrugated metal casing, meet IP30 protection grade.
EMC Level-4 design. -
Oil pressure regulator
Oil pressure regulator refers to a device that adjusts the fuel pressure entering the injector according to the change of intake manifold vacuum, keeps the difference between fuel pressure and intake manifold pressure unchanged, and keeps the fuel injection pressure constant under different throttle opening.
-
Managed 8*1000Base T(X) +2*1000Base SFP FX Industrial Ethernet Switch
8*1000Base T(X) fast Ethernet ports& 2*1000Base SFP FX fiber optic ports
Camera can reach up to 250M in extended mode, switching through a dip switch.
Wire speed forwarding capability of all ports make sure of non-blocking message forwarding.
Automatic MDI/MDI-X crossover for plug-and-play
Support redundant Ring protocol( recovery time≤20ms)
Support 802.1x authentication, VLAN, and broadcast storm suppression.
Loop detection and Port+ IP+MAC binding.
Support POE power configuring, monitoring, diagnosing and summary statistics.
Port traffic monitoring and fault event alarming
Support WEB visual interface, support SNMP management.
Support full-loaded operating temperature range -40 to 85℃.
No fan, low power consumption design.
Din rail corrugated metal casing, meet IP40 protection grade.
Industrial Level-4 design. -
Throttle body
The function of throttle body is to control the air intake when the engine is working. It is the basic dialogue channel between EFI system and driver. The throttle body is composed of valve body, valve, throttle pull rod mechanism, throttle position sensor, idle speed control valve, etc. Some throttle bodies have a coolant pipeline. When the engine works at a cold and low temperature, hot coolant can prevent freezing in the valve plate area through the pipeline. It is mounted in front of the intake manifold.
-
Managed 4*1000Base T(X) + 2*1000Base SFP port Industrial Ethernet Switch
4* 1000Base T(X) ports + 2 Gigabit SFP ports
Wire speed forwarding capability of all ports make sure of non-blocking message forwarding.
Automatic MDI/MDI-X crossover for plug-and-play
Support redundant Ring protocol
Support 802.1x authentication, VLAN, and broadcast storm suppression.
Loop detection and Port+ IP+MAC binding.
Port traffic monitoring and fault event alarming
Support WEB visual interface, support SNMP management.
Support full-loaded operating temperature range -40 to 85℃.
No fan, low power consumption design.
EMC-4
IP40 protection
