China Supplier Anti hawan Galvanized shinge
Bayanan asali
Launi | Customed Yana Yiwuwa |
Nau'in | Waya raga |
Takaddun shaida | ISO9001 |
Sharadi | Sabo |
Sunan samfur | Rufaffen Welded Waya raga |
Wurin Asalin | Hebei, China |
Diamita Waya | 3mm 4mm ko azaman Bukatun ku |
Girman | 76.2mm*12.7mm ko kamar yadda Bukatar ku |
Nau'in Saƙa | Walda |
Aikace-aikace | Waya Waya da Kayan Gina |
Kunshin sufuri | Tire ko azaman Nemanka |
Ƙayyadaddun bayanai | 1220*2440mm ko kamar yadda ka bukata |
Asalin | China |
HS Code | Farashin 731490000 |
Ƙarfin samarwa | 3000 Square Mita/Rana |
Bayanin Samfura
BS1722 Galvanized Weld Wire Mesh Anti Hawa 358 Babban Katangar Tsaro don Filin Jirgin Sama Gas Tatar Jiyya Ma'aikatar Railway
Anti hawan shinge-Tsarin bangon bango
Samfurin shine tsarin shingen ƙirar mu na musamman don maganin tsaro.
Ya haɗa da ragar panel, post C da na'urorin haɗi, ragamar panel ɗin an welded tare da waya mai galvanized kamar yadda ta EN10244 kuma post ɗin yana siffata daga coils galvanized kamar yadda ta EN10346.
A kusoshi da kwayoyi ne bakin karfe 304 , panel da post ne foda mai rufi da Akzo Nobel- Interpon 600 jerin foda da wuce 500H-1000H gishiri fesa bi ISO9227.
Siffa:
1. Kyakkyawan bayyanar ko gani ta hanyar kallo
2. M isa tare da cikakken karfe tsarin
3. Mai sauƙi da sauƙi shigarwa
4. Madadin duka binne ƙasa ko shigarwa flange
5. Dace da lebur ƙasa da gangaren ƙasa shigarwa
6. High tsaro kariya da anti hawan
7. Anti yankan da dorewa
8. Ma'auni: BS1722-14, ISO1461, EN13438, EN10436
Aikace-aikace:
Amintaccen bango ya dace da:
* Kurkuku,* Tashoshin wutar lantarki, * Ayyukan gwamnati,* Parks* Masana'antu* Warehouses,* Kayan wasanni,* Aikace-aikacen kasuwanci da masana'antu,* Airport,* Kayayyakin aikin bututun mai,* Titin jirgin kasa,* sansanin soja,* Harbor
BS1722 Galvanized Weld Wire Mesh Anti Hawa 358 Babban Katangar Tsaro don Filin Jirgin Sama Gas Tatar Jiyya Ma'aikatar Railway
Ƙayyadaddun bayanai
Lambar | Salon panel | Girman panel (H*W) | Karka (mm) | Diamita Waya (mm) | C Post | Tsawaita |
Farashin 111830 | 3D | 1830*2740 | 76.2*12.7 | 3+4mm | 76*64 | bango karu, Barbed waya, lantarki shinge |
Farashin 1112130 | 3D | 2130*2740 | 76.2*12.7 | 3+4mm | 76*64 | bango karu, Barbed waya, lantarki shinge |
Farashin 1112440 | 3D | 2440*2130 | 76.2*12.7 | 3+4mm | 76*64 | bango karu, Barbed waya, lantarki shinge |
Farashin 1112740 | 3D | 2740*2130 | 76.2*12.7 | 3+4mm | 76*64 | bango karu, Barbed waya, lantarki shinge |
Farashin 1121830 | 2D | 1830*2440 | 76.2*12.7 | 4+4mm | 76*64 | bango karu, Barbed waya, lantarki shinge |
Farashin 1122130 | 2D | 2130*2440 | 76.2*12.7 | 4+4mm | 76*64 | bango karu, Barbed waya, lantarki shinge |
Farashin 1122440 | 2D | 2440*2130 | 76.2*12.7 | 4+4mm | 76*64 | bango karu, Barbed waya, lantarki shinge |
Farashin 1122740 | 2D | 2740*2130 | 76.2*12.7 | 4+4mm | 76*64 | bango karu, Barbed waya, lantarki shinge |
Cikakken Bayani
Kunshin shinge:
The shinge panel aka welded da mu ci-gaba atomatik inji kamar yadda ta BS1722-14 don ba da shinge high welded karfi ƙarfi da kuma mafi m bayan shigarwa.waya diamita zo da 3mm,4mm,5.6mm, raga size a 76.2*12.7mm ko 75x12.5mm.
A surface jiyya a pre galvanized / HDG + polyester foda shafi kamar yadda ta EN10245 / EN10348, daidaitattun launuka: RAL6005 Green, RAL9005 Black, RAL7040 Grey, RAL7016 Grey, RAL5002 Blue, sauran launuka a kan bukatar.
Buga:
The C post ne mu musamman zane a kan shinge kasuwa, shi ke dimbin yawa daga galvanized coils kamar yadda ta EN10346.post ne m tsarin da m bayyanar.
A surface jiyya a pre galvanized / HDG + polyester foda shafi kamar yadda ta EN13438, daidaitattun launuka: RAL6005 Green, RAL9005 Black, RAL7040 Grey, RAL7016 Grey, RAL5002 Blue, sauran launuka a kan bukatar.
Na'urorin haɗi:
1. Kayan aikin shigarwa: lebur bar-H1, bolt, shear off nut, washers, rain-hat.
2. Extension Fittings: reza waya, barbed waya, tsawo hannu (guda ko biyu hannu), bango karu.
3. Tsaro Inganta Kayan aiki: tsarin shinge na lantarki
Kofa:
Ƙofofin don amintaccen tsarin bango iri-iri:
1. Ƙofar hannu.Ƙofa mai lilo guda ɗaya, Ƙofa mai lilo biyu, Ƙofa mai zamewa.
2. Ƙofa ta atomatik: Ƙofar lilo guda ɗaya, Ƙofar lilo biyu, Ƙofar zamiya, Ƙofar cantilever.
Magani Ingantaccen Tsaro:
Za a iya samar da tsarin shinge na lantarki a inda ake buƙatar ingantaccen tsaro.
Sauran Salon Anti hawan shingen da muke samarwa don Ayyuka
An Samar da Zane da Ƙirƙirar Samfura da Sabis na Manual
Kula da inganci
A matsayin ISO9001 & ISO14001 bokan kamfanin, Mu ko da yaushe samar high quality kayayyakin zuwa karshen masu amfani, da kuma tabbatar da daidaito na ingancin, mun kashe mai yawa kokarin a zabi da kuma inganta mu albarkatun kasa & kayan aiki samar da sarkar.Bugu da ƙari, mun kuma kula da QC akan kowane tsarin samarwa.Yanzu ƙimar da ta dace na samfuran DD-FENCE ya kai 99.5%.Kuma garantin ingancin samfuran ya kasance daga Shekaru 10-20.
Marufi da jigilar kaya
* Panel-Metal Pallet nannade da farantin kwali sannan a nannade shi da fim din filastik
* An nannade shi da jakunkuna PP, sannan a saka pallet, an nannade shi da fim ɗin filastik
* Na'urorin haɗi- Kartin
* Akwai marufi na musamman
Idan kuna sha'awar samfurinmu ko kuna da tambaya, pls jin daɗin tuntuɓar ni.
Cikakken binciken ku zuwa me, za a sami amsa a cikin sa'o'i 24!
Keɓance Ayyuka
Za mu iya samar da nau'ikan samfuran raga na welded da yawa, idan kuna da ƙirar ku ko kuna da zane na musamman, za mu iya yin samfuran azaman buƙatun ku.
Idan ba ku da wani ra'ayi, da fatan za a gaya mana inda za a yi amfani da shi, za mu ba ku wasu ƙayyadaddun bayanai don komawa, kuma za mu iya samar da zanen.
FAQ
Q1.Ta yaya za mu iya kawo maku labari?
Da fatan za a aiko mana da tambaya ta imel, tare da duk zane-zanen fasaha da kuke da su.Kamar abu sa, haƙuri, machining bukatun, surface jiyya, zafi magani, inji dukiya bukatun, da dai sauransu Our musamman injiniya zai duba da quote a gare ku, za mu yaba da damar da za su amsa a cikin 3-5 aiki kwanaki ko žasa.
Q2.Ta yaya zan iya samun samfurin don duba ingancin ku?
Bayan an tabbatar da farashin, zaku iya buƙatar samfuran don bincika inganci.
Idan kuna buƙatar samfuran, za mu cajin kuɗin samfurin.
Amma farashin samfurin za a iya dawowa lokacin da yawan odar ku na farko ya fi MOQ.
Q3.Za ku iya yi mana OEM?
Ee, ana iya tsara marufin samfur kamar yadda kuke so.
Da fatan za a ji daɗin tuntuɓar mu idan kuna da wata tambaya.